Sandvik Coromant launches an extension to its range of Silent Tools milling adapters. Available in lengths 4-5xD these new dampened adapters can provide more than 50% productivity increases over undampened assemblies.
Dampening
The full benefits of the patented dampening mechanism can be seen when applied to a wide variety of milling operations. The adapters will enhance surface finishing significantly, even with increased cutting data, allow longer engagement milling cycles through increased temperature limitation and the possibility to channel coolant through the arbor, increases tool life.
 |
 |
 |
What standard bore sizes, shell mill adapters, etc.. will the silent tools milling adaptors accept or is it limited to a proprietary system?
The silent tools milling adapters have standard shell mill mounting with the pilot and drive keys. They accept the standard inch and metric pilot bores. Here is the range of pilot bores in the standard program:
Inch
0.750″
1.00″
1.50″
Metric
16 mm
22 mm
27 mm
32 mm
For additional questions, contact:
Brent Godfrey
Sandvik Coromant US: Power Generation / Tooling Systems
Office Phone: +1 201.794.5146
Is this product going to be offered as a standard with HSK100A taper?
Hi Kyle
Yes, we have HSK 100A available now. Here are those products:
product code description
A392.4105CD10025230 230 mm (9.055″) gauge length and 1″ pilot
392.41005CD10022230 230 mm (9.055″) gauge length and 22 mm pilot
392.41005CD10027230 230 mm (9.055″) gauge length and 27 mm pilot
what is the price for the .75 1.00 and 1.50 inch silent tool adapters? i think i’ll order all three if the price is decent.
Pricing can be provided by your local Sandvik Coromant sales representative. Find yours HERE (link: http://locatedistributor.coromant.sandvik.com) or dial 1-800-SANDVIK to talk with a yellow coat expert today.